I'm working on a few canes this week, using Premo Pearl clay in blends of woodsy earth tones, turquiose, green, brown, and tan.
I created a tab bead bracelet using the large cane, I added Gold Leaf accents to the edges. I polished the beads using my bench lathe. I also made a pendant & earring set, that has a coating of Enviro-tex lite resin.
The pink/orange/gold tab bracelet in the right hand corner was an experiment in Faux Raku. I used a base of black clay & texturized it with extra-large grit sandpaper. Then I applied Pearl-Ex powders & Perfect Pearls using my finger. Next, I dabbed on some Sculpey Glaze, then baked the beads for 30 minutes. The Sculpey Glaze caused the Pearl-ex powders to bubble up (looking more like a ceramic Glaze). While the beads were still hot from the oven I added some Kato Clear liquid clay straight from the squeeze bottle, kind of blobbing it on. I popped them in the oven again for another 30 minutes, using the heat gun to clarify them.
Showing posts with label envirotex lite. Show all posts
Showing posts with label envirotex lite. Show all posts
Friday, January 17, 2014
Sunday, July 17, 2011
Polymer Clay & Resin
Some of my latest creations feature a nice thick coat of Enviro-tex resin. I never liked working with resin, but I decided to give it another try. Finally, getting the hang of it! Seems it takes some fussing with a toothpick to keep it evenly at the edges, or else it doesn't stay and shrinks back as it cures. It takes some practice, that's for sure. Being the impatient person that I am, I couldn't wait 8-10 hours for it to cure either! I popped the pendants in my craft oven at 200 degrees and after about 15 minutes...Wha-La!!
| Blue-Green Paisley |
Subscribe to:
Posts (Atom)


